Figure 22 Vertical (Process) Deletions; Table 105 Vertical (Process) Deletions Troubleshooting Procedure - Xerox 5400N - Phaser B/W Laser Printer Service Quick Reference Manual

RAP 74 Vertical (Process) Deletions

Figure 22 Vertical (Process) Deletions

Table 105 Vertical (Process) Deletions Troubleshooting Procedure

Step Actions and Questions
1 INITIAL ACTIONS
Check that the paper supply is dry and fresh.
I
Inspect the printer paper path for items such as
I
staples, paper clips, paper scraps and/or debris.
Check the installation of the Print Cartridge.
I
Check that the Print Cartridge contact points are clean.
I
Ensure there are no obstructions in the Laser Beam
I
path.
Check that the rollers and other components in the
I
paper path are clean and unobstructed.
PAPER REPLACEMENT
2
1. Load fresh, dry paper.
2. Run a Test Print.
Are vertical deletions still present?
3 PRINT CARTRIDGE REPLACEMENT
1. Install a new Print Cartridge.
2. Run a Test Print.
Are vertical deletions still present?
LASER BEAM PATH INSPECTION
4
Inspect the laser beam path between the Laser
Assembly and the Drum.
Is the laser beam path free of obstructions?
5 PAPER PATH INSPECTION
Inspect the paper path, between feed and exit, for
contamination or obstructions.
Is the paper path free of contamination and
obstructions?
188
A deletion is an area of the print where the image is
missing or extremely light. Vertical band deletions
are deletions which extend across the page in the
process direction.
Phaser 5400 Laser Printer Service Guide
Yes No
Go to Problem
Step 3. solved.
Go to Problem
Step 4. solved.
Go to Remove any
Step 5. obstructions
from the laser
beam path.
Go to Remove
Step 6. obstructions
or
contamination
from the
paper path.