Vertical Service Announcement Codes; Outbound Call Codec Selection Codes - Cisco Small Business SPA509G Administration Manual

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Vertical Service Announcement Codes

• Service Annc (Announcement) Base Number: Defaults to blank.
• Service Annc (Announcement) Extension Codes: Defaults to blank.

Outbound Call Codec Selection Codes

These codes automatically appended to the dial plan. You do not need to include
them in the dial plan.
Parameter
Prefer G711u Code
Force G711u Code
Prefer G711a Code
Force G711a Code
Prefer G722 Code
Description
Makes this codec the preferred codec for the
associated call.
Defaults to *017110.
Makes this codec the only codec that can be used for
the associated call.
Defaults to *027110.
Makes this codec the preferred codec for the
associated call.
Defaults to *017111
Makes this codec the only codec that can be used for
the associated call.
Defaults to *027111.
Makes this codec the preferred codec for the
associated call.
Defaults to *01722.
Only one G.722 call at a time is allowed. If a conference
call is placed, a SIP re-invite message is sent to switch
the calls to narrowband audio.
NOTE Not supported on the WIP310.
B
271