Call Progress Tones - Cisco Small Business SPA509G Administration Manual

Cisco SPA IP Phone Field Reference
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
• Vertical Service Activation Codes, page 265
• Vertical Service Announcement Codes, page 271
• Outbound Call Codec Selection Codes, page 271
• Time (Cisco SPA525G/525G2 Only), page 274
• Language (Cisco SPA525G/525G2 Only), page 274
• Miscellaneous, page 274

Call Progress Tones

Parameter
Dial Tone
Bluetooth Dial Tone (Cisco
SPA525G/525G2 only)
Outside Dial Tone
Prompt Tone
Busy Tone
Reorder Tone
Description
Prompts the user to enter a phone number.
Defaults to 350@-19,440@-19;10(*/0/1+2).
Tone that indicates a bluetooth headset is on and the
user can make a call.
Defaults to 350@-19,440@-19;1(0/*/0);10(*/0/1+2).
Alternative to the Dial Tone. It prompts the user to enter
an external phone number, as opposed to an internal
extension. It is triggered by a, (comma) character
encountered in the dial plan.
Defaults to 420@-16;10(*/0/1).
Prompts the user to enter a call forwarding phone
number.
Defaults to 520@-19,620@-19;10(*/0/1+2).
Played when a 486 RSC is received for an outbound
call.
Defaults to 480@-19,620@-19;10(.5/.5/1+2).
Played when an outbound call has failed or after the far
end hangs up during an established call. Reorder Tone
is played automatically when <Dial Tone> or any of its
alternatives times out.
Defaults to 480@-19,620@-19;10(.25/.25/1+2).
B
261