Configuring The Vlan Settings - Cisco Small Business SPA509G Administration Manual

Configuring Security, Quality, and Network Features
Configuring VLAN Settings for IP Phones
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Configuring the VLAN Settings

Log in to the configuration utility.
Click Admin Login and advanced.
Click the System tab.
Under VLAN Settings, enter the following parameters:
Parameter
Enable VLAN
VLAN ID
PC Port VLAN Highest Priority
Enable PC Port VLAN Tagging
PC Port VLAN ID
Enable CDP
Description
Choose Yes to enable VLAN. Choose no to
disable.
If you use a VLAN without CDP (VLAN enabled
and CDP disabled), enter a
phone. Note that only voice packets are tagged
with the VLAN ID. Do not use 1 for the VLAN ID.
Choose No Limit, or 0-7 (default 0). The highest
priority is 7. The priority applied to all frames,
tagged and untagged. The phone modifies the
frame priority only if the incoming frame priority
is higher than this value.
Enables VLAN and priority tagging on the phone
data port (802. 1 p/q). This feature facilities
tagging of the VLAN ID (802. 1 Q) and priority bits
(802. 1 p) of the traffic coming from the PC port of
the IP phone.
Defaults to No. Choose Yes to enable the
tagging algorithm.
0-4095 (default 0). Value of the VLAN ID. The
phone tags all the untagged frames coming from
the PC (it will not tag frames with an existing
tag).
Enable CDP only if you are using a switch that
has Cisco Discovery Protocol. CDP is
negotiation based and determines which VLAN
the IP phone resides in.
5
VLAN ID
for the IP
160