Downloading The Firmware; Installing The Firmware - Cisco Small Business SPA509G Administration Manual

Getting Started
Upgrading Firmware
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
The IP Address section displays the IP address.

Downloading the Firmware

To download firmware requires a Cisco.com user ID and password.
Direct your browser to the URL
index.shtml.
Search to locate your product.
Locate the download page and download the firmware file.
If the firmware file you download is in zip format, double-click the file and extract
its contents to a single folder or to the desktop.

Installing the Firmware

Your computer must be on the same sub-network as the phone you are upgrading.
Cisco SPA30X and Cisco SPA50XG
Run the executable file for the firmware upgrade.
Click Continue after reading the message regarding upgrading and your service
provider information.
Enter the IP address of the phone.
Follow the on-screen directions.
Cisco SPA525Gm, 525G2
Log in to the configuration utility for the phone.
Choose the Firmware Upgrade tab.
Click Firmware Upgrade Window.
http://www.cisco.com/public/sw-center/
1
20