Cisco Small Business SPA509G Administration Manual page 122

Configuring SIP, SPCP, and NAT
Configuring SIP
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Voice Quality Report
Address
Description
For configuration of a SIP event package, SIP PUBLISH, that
enables the collection and reporting of metrics that measure
the quality for VoIP sessions. Voice call quality information
derived from RTCP-XR and call information from SIP is
conveyed from a User Agent in a session to the third party in
SIP PUBLISH method.
To configure, first configure RTCP-XR (see the
RTP Parameters" section on page
need to configure the RTCP Tx Interval. In the Voice Quality
Report Address field, enter the name of the collector that will
collect the statistics from the SIP PUBLISH events. For
example, enter collector@
(collector@reports.cisco.com) or
(collector@192. 1 68.5. 1 ).
After RTCP-XR feature is enabled, the call status information is
updated on the Voice > Info page during an active call.
Additionally, RTCP-XR packets containing a voice metrics
block report will be sent with the interval specified in the RTCP
Tx Interval. When the call session is ended, a SIP PUBLISH with
voice metrics info is sent to the collector endpoint.
This parameter supports a full SIP URI. Examples of valid
addresses are:
• collector@domain.com
• 123.collect@123. 1 23. 1 23. 1 23:5555
• 5678@domain.com:5656
For example to configure for extension 1, edit the phone's
configuration file as follows:
<Voice_Quality_Report_Address_1_ ua="na">
collector@domain.com
</Voice_Quality_Report_Address_1_>
or
<Voice_Quality_Report_Address_1_ ua="na">
123.collect@123.123.123.123:5555
</Voice_Quality_Report_Address_1_>
or
<Voice_Quality_Report_Address_1_ ua="na">
5678@domain.com:5656
</Voice_Quality_Report_Address_1_>
"Configuring
112). For example, you
fully-qualified-domain-name
collector IP address
@ -
4
121