Cisco Small Business SPA509G Administration Manual page 283

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Select Background Picture
Softkey Labels Font
Screen Saver Enable
Screen Saver Wait
Description
Select from Default, BMP Picture, or None.
Defaults to Default.
NOTE Not applicable to the WIP310, SPA301, or
SPA501. On the Cisco SPA525G/525G2, this setting is
located in the User tab. See
525G2), page 321.
Choose the font width for the softkey labels to display
on your phone. See Customizing Phone Softkeys,
page 65.
NOTE Not applicable to the WIP310, SPA301, or
SPA501.
Enables a screen saver on the phone's LCD. When the
phone is idle for a specified time, it enters screen saver
mode. (Users can set up screen savers directly using
phone Setup button.)
Any button press or on/off hook event triggers the
phone to return to its normal mode. (The screen shows
"Press any key to unlock your phone.") If a user
password is set, the user must enter it to exit screen
saver mode.
NOTE Not applicable to the WIP310, SPA301, or
SPA501. Screen saver settings are found in the User tab
on the Cisco SPA525G/525G2.
Amount of idle time before screen saver displays.
NOTE Not applicable to the WIP310, SPA301, or
SPA501. Screen saver settings are found in the User tab
on the Cisco SPA525G/525G2.
B
Screen (Cisco SPA525G/
282