Cisco Small Business SPA509G Administration Manual page 55

Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Information and Display Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
This option enables a screen saver on the phone's LCD. When the phone is idle for
a specified time, it enters screen saver mode. (Users can set up screen savers
directly using phone's Setup button.)
Any button press or on/off hook event triggers the phone to return to its normal
mode. If a user password is set, the user must enter it to exit screen saver mode.
To configure the screen saver:
Cisco SPA303 or Cisco SPA50XG:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab.
In the General section, in the Screen Saver Enable field, choose yes.
In the Screen Saver Wait field, enter the number of seconds of idle time to elapse
before the screen saver starts.
In the Screen Saver Icon field, choose the display type:
• A background picture.
• The station time in the middle of the screen.
• A moving padlock icon. When the phone is locked, the status line displays a
scrolling message "Press any key to unlock your phone."
• A moving phone icon.
• The station date and time in the middle of the screen.
• A blank "power save" screen."
Click Submit All Changes.
Cisco SPA525G/525G2:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the User tab.
Under Screen, in the Screen Saver Enable field, choose yes.
3
54