Managing The Time And Date - Cisco Small Business SPA509G Administration Manual

Localizing Your IP Phone
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Field
Set Local Date
(mm/dd)
Set Local Time
(HH/mm)
Time Zone
Time Offset (HH/
mm)
Daylight Saving
Time Rule
Daylight Saving
Enable
Dictionary Server
Script
Language
Selection

Managing the Time and Date

Cisco IP phones obtain the current time information in one of three ways:
Description
mm
Enter the local date (
the day). The year is optional and uses two or four digits. For
example,
May 1, 2008, can be entered as:
05/01 or 05/01/08 or 05/01/2008
hh
Enter the local time (
minutes). Seconds are optional.
Selects the number of hours to add to GMT to generate the local
time for caller ID generation. Choices are GMT-12:00, GMT-
11:00,..., GMT, GMT+01:00, GMT+02:00, ..., GMT+13:00.
Defaults to GMT-08:00.
This specifies the offset from GMT to use for the local system
time.
Enter the rule for calculating daylight saving time. See the
"Configuring Daylight Saving Time" section on page
Select yes to enable or no to disable DST on the phone. This
setting affects all lines (extensions) on the phone.
Defines the location of the dictionary server, the languages
available and the associated dictionary. See the
Dictionary Server Script" section on page
Specifies the default language. The value must match one of the
languages supported by the dictionary server. The script (dx
value) is as follows:
<Language_Selection ua="na">
</Language_Selection>
Defaults to blank; the maximum number of characters is 512. For
example:
<Language_Selection ua="na"> Spanish
</Language_Selection>
represents the month and
mm
represents hours and
199.
7
dd
represents
represents
197.
"Creating a
196