Configuring Back Light Settings (Cisco Spa525G/525G2); Configuring Linksys Key System Parameters - Cisco Small Business SPA509G Administration Manual

Customizing Cisco SPA and Wireless IP Phones

Configuring Linksys Key System Parameters

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Configuring Linksys Key System Parameters
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Cisco SPA525G/525G2:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the User tab.
Under Screen, in the LCD Contrast field, enter a number value from 1 to 30. The
higher the number, the greater the contrast on the screen.
Click Submit All Changes.

Configuring Back Light Settings (Cisco SPA525G/525G2)

To configure the back light settings for the LCD screen on the phone:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the User tab.
Under Screen, in the Back Light Enable field, choose yes to enable the screen
back light.
In the Back Light Timer field, enter the number of seconds of idle time that can
elapse before the back light turns off.
Click Submit All Changes.
To configure the phone as part of a Linksys Key System (for use with the Cisco
SPA 9000):
Log in to the configuration utility.
Click Admin Login and advanced.
Click the SIP tab.
3
56