Cisco Small Business SPA509G Administration Manual page 120

Configuring SIP, SPCP, and NAT
Configuring SIP
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Refer-To Target
Contact
Referee Bye Delay
SIP Debug Option
Refer Target Bye
Delay
Description
To contact the refer-to target, select yes. Otherwise, select no.
Default: no.
For the Referee Bye Delay, enter the appropriate period of time
in seconds.
Defaults to 0.
SIP messages are received at or sent from the proxy listen
port. This feature controls which SIP messages to log. Choices
are as follows:
• none—No logging.
• 1-line—Logs the start-line only for all messages.
• 1-line excl. OPT—Logs the start-line only for all messages
except OPTIONS requests/responses.
• 1-line excl. NTFY—Logs the start-line only for all messages
except NOTIFY requests/responses.
• 1-line excl. REG—Logs the start-line only for all messages
except REGISTER requests/responses.
• 1-line excl. OPT|NTFY|REG—Logs the start-line only for all
messages except OPTIONS, NOTIFY, and REGISTER
requests/responses.
• full—Logs all SIP messages in full text.
• full excl. OPT—Logs all SIP messages in full text except
OPTIONS requests/responses.
• full excl. NTFY—Logs all SIP messages in full text except
NOTIFY requests/responses.
• full excl. REG—Logs all SIP messages in full text except
REGISTER requests/responses.
• full excl. OPT|NTFY|REG—Logs all SIP messages in full text
except for OPTIONS, NOTIFY, and REGISTER requests/
responses.
Defaults to none.
For the Refer Target Bye Delay, enter the appropriate period of
time in seconds.
Defaults to 0.
4
119