Configuring the Cisco SPA500S Attendant
Console
Cisco SPA500S Features
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
The Cisco SPA500S is a 32-button attendant console for the Cisco SPA500 Series
IP Phones. The Cisco SPA500S works in both SIP and SPCP mode. The Cisco
SPA500S connects to the phone with the attachment arm provided (not shown). It
obtains power directly from the phone and does not require a separate power
supply. Two Cisco SPA500S units can be attached to a single phone to monitor a
total of 64 separate lines.
For more information about installing and configuring the Cisco SPA500S with a
Cisco SPA 9000 system, see the
Configuration Guide
.
This chapter contains the following sections:
•
Configuring the Cisco SPA 9000 for the Cisco SPA500S, page 215
•
Configuring the BroadSoft Server for the Cisco SPA500S, page 216
•
Configuring the Asterisk Server for the Cisco SPA500S, page 216
•
Configuring the Cisco SPA500S, page 217
•
Unit/Key Configuration Scripts, page 218
•
Attendant Console Parameters, page 222
•
Monitoring the Cisco SPA500S, page 224
Cisco SPA500S features include:
•
32 programmable speed-dial or direct station select (DSS) buttons/LEDs
•
Three-color LEDs (red, green, and orange)
Cisco SPA 9000 Voice System Installation and
9
213