Supplementary Services - Cisco Small Business SPA509G Administration Manual

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Remote Active LED
Local Held LED
Remote Held LED
Register Failed LED
Disabled LED
Registering LED
Call Back Active LED
Trunk In-Use LED
Trunk No Service LED
Trunk Reserved LED

Supplementary Services

Enable or disable the corresponding supplementary services on the phone. A
value of "yes" indicates enabled; "no" indicates disabled.
Description
LED pattern during the Remote Active state, where
another station is engaged in an active call on this
shared call appearance. Not applicable is this call
appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=d.
LED pattern during the Local Held state, where the call
appearance is held by this station. Leaving this entry
blank indicates the default value of c=r;p=s.
LED pattern during the Remote Held state, where
another station has placed this call appearance on
hold. Not applicable if the call appearance is not
shared. Leaving this entry blank indicates the default
value of c=r,p=s.
LED pattern when the corresponding extension has
failed to register with the proxy server. Leaving this
entry blank indicates the default value of c=a.
LED pattern when the Call Appearance is disabled (not
available for any incoming or outgoing call). Leaving
this entry blank indicates the default value of c=o.
LED Pattern when the corresponding extension is
trying to register with the proxy server. Leaving this
entry blank indicates the default value of c=r;p=s.
Call Back operation is currently active on this call
appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=s.
LED pattern that indicates that a shared trunk is in use.
LED pattern that indicates that a shared trunk is not in
service.
LED pattern to indicate that a shared trunk has been
reserved.
B
287