Configuring The Broadsoft Server For The Cisco Spa500S; Configuring The Asterisk Server For The Cisco Spa500S - Cisco Small Business SPA509G Administration Manual

Configuring the Cisco SPA500S Attendant Console
Setting Up the Cisco SPA500S Attendant Console
STEP 1
STEP 2
STEP 3
NOTE
STEP 4
STEP 5
STEP 6
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Configuring the BroadSoft Server for the Cisco SPA500S

The BroadSoft server requires you to assign IP phone users to the Busy Lamp
(BLF) Monitor Users List. The BroadSoft server sends updates on the status of
each phone on this list to the Cisco SPA500S, which subscribes for this service.
To configure the BroadSoft server to support the Cisco SPA500S:
On the BroadSoft server, in the user profile used by the phone to register with the
BroadSoft server, select Assign Services.
On the Assign Services page, from the Available Services column, move Busy
Lamp to the User Services column.
Define the List URI used by the Cisco SPA500S to register for BLF monitoring
service with the BroadSoft server. This value must match the value entered
following the sub = keyword (for example, cisco_list). Select the domain from
the drop-down list to match the Unit Key.
If you configure more than one monitored list on the BroadSoft server, use the vid=
keyword in each unit/keyconfiguration script to specify the phone extension to use
for each list.
On the Busy Lamp Field page, move users that need to be monitored from the
Available Users column to the Monitored Users column.
Click the Add (or Add All) button to move each user to the Monitored Users
column. The Directory Number (DN) associated with each user account when it is
created on the BroadSoft Server is shown in parenthesis in the Monitored Users
list. You use this DN to identify the specific phone assigned to each key on the
Cisco SPA500S.
Save and enable your configuration changes on the BroadSoft server.
See also the "Configuring BroadSoft Busy Lamp Field Auto-Configuration"
section on page 222.

Configuring the Asterisk Server for the Cisco SPA500S

To configure the Asterisk server to allow the Cisco SPA500S to register for BLF
monitoring:
9
216