Unit/Key Configuration Scripts - Cisco SPA942 - - IP Phone Administration Manual

Configuring the SPA932 Attendant Console
Setting Up the SPA932 Attendant Console
STEP 7
STEP 8
STEP 9
STEP 10
Cisco SPA and Wireless IP Phone Administration Guide
Server Type
Select your
• SPA9000
• BroadSoft
• Asterisk
Make sure that no is selected for
default. You cannot complete the software configuration for the SPA932 if this
option is enabled. (You can use Test Mode Enable later to test the SPA932.)
Create a configuration script for each target extension or user you want to monitor
using the SPA932. Enter this script in the appropriate field for each unit/key. See
"Unit/Key Configuration Scripts" section on page
Click Submit All Changes.
The SPA932 allows only one unit/key entry for each target extension or user. The
subscription for the user fails if the user is configured on more than one unit/key, or
if the target extension is a shared extension. For example, the following
fail
configuration would
on two unit/keys; all functions should be put on one unit/key:
Unit/key1: func=sd;usr=101@$PROXY;nme=test;vid=2;sub=arupiSSomSok1@$PROXY
Unit/key2: fnc=blf+cp;usr=101@$PROXY;nme=test;vid=2;sub=arupiSSomSok1@$PROXY

Unit/Key Configuration Scripts

By default, all LEDs on the SPA932 are assigned to the first configured extension
on the phone to which it is connected. Assign the LEDs to any of the other five
extensions on the phone that you want to monitor using the SPA932.
The configuration script is composed of the following keywords, followed by an
equal sign (=) and separated by semicolons (;):
• fnc—defines which of the following functions are enabled for the specified key
(separate more than one function with a plus sign (+):
• blf—busy lamp field function used for monitoring line activity
• sd—speed dial function
• cp—call pickup (if supported by the SIP proxy server). Call pickup (cp) must
be supported by the SIP proxy server and be used with blf in the
configuration. The syntax is fnc=blf+cp.
from the drop-down list:
Test Mode Enable
. It shows user 101 subscribed for two different functions
. This option is disabled by
179.
9
179