Cisco Small Business SPA509G Administration Manual page 40

Configuring Lines and Extensions
Configuring Lines
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Click advanced.
Click the Phone tab.
Find the first line to configure (line 4 in this example):
Extension
a. From the
Share Call Appearance
b. From the
c. Enter the following string in the Extended Function field:
fnc=blf+cp;sub=Stephanie@$PROXY;ext=300@$PROXY
Using the following syntax:
fnc=type;sub=stationname@$PROXY;ext=extension#@$PROXY
where:
- fnc: function
- blf: busy lamp field
- cp: call pickup
- sub: station name
- ext or usr: extension or user (the usr and ext keywords are
interchangeable)
Click Submit All Changes. After the phone reboots, the phone (in this example)
should show the following color LEDs for the monitored lines:
• Green: Available
• Red: Busy
• Red Fast Blink: Ringing
If the phone LEDs display orange or slow blinking orange, there is a problem:
Orange denotes that the phone failed to subscribe (received 4xx response) and
slow blinking orange denotes an undefined problem (there may be no response to
subscribe, or BLF).
In this example, after this configuration, Bob will be able to monitor Stephanie's
line. He can press line button 4 to pick up a call ringing at Stephanie's line.
drop down list, choose Disabled.
drop-down list, choose private.
2
39