Using Mute; Switching Between Multiple Calls; Switching An In-Progress Call To Another Phone - Cisco 7921G User Manual

Using Mute

With Mute enabled, you can hear other parties on a call, but they cannot hear you. You can use Mute
with the phone or a headset.
If you want to...
Toggle Mute on
Toggle Mute off

Switching Between Multiple Calls

You can switch between multiple calls on one or more lines. If the call that you want to switch to is
not automatically highlighted on the phone screen, scroll to it.
If you want to...
Switch between
connected calls on one
line
Switch between
connected calls on
different lines
Switch from a
connected call to
answer a ringing call
Tips
• The phone can have up to six lines, but the phone screen displays only one line. To see other lines,
you must press
• The phone can have multiple calls per line, but no more than 24 calls per phone.

Switching an In-Progress Call to Another Phone

You can switch in-progress calls between the desktop phone and your cellular phone or other remote
destination.
Cisco Unified Wireless IP Phone 7921G for Cisco Unified Communications Manager 4.3, 5.1, 6.0 and Later
Then...
During a call, press
at the top of the phone screen.
Press . The
Then...
1. Make sure the call that you want to switch to is highlighted.
2. Press Resume.
Any active call is placed on hold and the selected call is resumed.
1. Press (Line View) to change to another line.
2. If a single call is holding on the line, the call automatically resumes. If
another call is holding, scroll to highlight the appropriate call and
press Resume.
Press , or if the call is ringing on a different line, press
View) to switch to the other line and press
Any active call is placed on hold.
(Line View).
on left side of phone. The
icon disappears.
.
Basic Call Handling
icon displays
Line
35