Configuring Date And Time - Cisco SPA 504g User Manual

Configuring Date and Time

Setting Your Phone's Date and Time
The date and time for your phone normally come from the SIP proxy server or NTP server. However, if
you need to change some date and time parameters, you can follow these steps:
STEP 1 Press the Setup button.
STEP 2 Select Time/Date.
STEP 3 Enter the date in the following format: mm*dd*yy (this will display as m/d).
STEP 4 Enter the time in the following format: hh*mm*ss (this will display as (h:mm).
STEP 5 If the time does not display am (a) or pm (p) correctly, adjust with Offset. To change from
a.m. to p.m., enter *12*00*00, to change from p.m. to a.m., enter #12*00*00.
STEP 6 Press save.
You can set just one of these choices, if necessary.
55