Configuring Date And Time Parameters On Your Phone - Cisco SPA 525g User Manual

Configuring Date and Time Parameters on Your Phone

The date and time for your phone normally come from the phone server. However, some date and
time parameters can be modified:
STEP 1 Press Setup.
STEP 2 Scroll to Device Administration and press Select.
STEP 3 Scroll to Date/Time and press Select.
STEP 4 Highlight the date and time setting that you want to change:
• Time Zone—Adds or subtracts hours to Greenwich Mean Time, or Western European Time.
Press the Right Arrow key to display the time zones. Highlight the desired time zone and press
Save.
• Daylight Saving—Adjusts the time on your phone at the twice-yearly adjustment intervals for
daylight saving time. Press the Left and Right Arrow keys to toggle Daylight Saving Time to on
(checked) or off (unchecked).
• Automatic Mode—Configures your phone to receive the time and date from the phone server.
Press the Left and Right Arrow keys to toggle automatic mode on (checked) or off (unchecked).
Press Set.
• NTP Server 1 and NTP Server 2—Enter a name or IP address of a Network Time Protocol (NTP)
server to receive the time and date from a Network Time Protocol (NTP) server and press Set.
• Set Current Time Manually—Press the Right Arrow key to set the date and time manually. Use
the Left and Right Arrow keys to move between the year, month, date, hour, and minute. Use
the Up and Down Arrow keys to change the value. Press Save.
NOTE If your phone is connected to an administration server that sets these values, any changes
you make to the date or time are lost when rebooting the phone.
85