Figure 41: Client Qos Acl; Table 53: Acl Configuration - D-Link DWL-3600AP Administrator's Manual
Unified wired & wireless access system
Hide thumbs
Also See for DWL-3600AP:
- Quick installation manual (9 pages) ,
- Specifications (4 pages) ,
- User manual (754 pages)
Table of Contents
Advertisement
Unified Access Point Administrator's Guide
The fields to configure ACL rules appear only after you have created an ACL. The following image shows the
configuration of a new rule for the IPv4 ACL named acl1. The rule prevents HTTP traffic from all clients in the
192.168.20.0 network from being forwarded.
The following table describes the fields available on the Client QoS ACL page.
Field
ACL Configuration
ACL Name
ACL Type
D-Link
November 2011
Figure 41: Client QoS ACL
Table 53: ACL Configuration
Description
Enter a name to identify the ACL. The name can contain from 1 – 3 1 alphanumeric
characters. Spaces are not allowed.
Select the type of ACL to configure:
• IPv4
• IPv6
• MAC
IPv4 and IPv6 ACLs control access to network resources based on Layer 3 and Layer
4 criteria. MAC ACLs control access based on Layer 2 criteria.
Managing Client QoS ACLs
Unified Access Point Administrator's Guide
Page 132
Advertisement
Table of Contents
