D-Link DWL-3600AP Administrator's Manual page 23

Unified Access Point Administrator's Guide
Field Description
Firmware Version Shows version information about the firmware currently installed on the AP. As new
versions of the WLAN AP firmware become available, you can upgrade the firmware on
your APs.
Product Identifier Identifies the AP hardware model.
Hardware Version Identifies the AP hardware version.
Serial Number Shows the AP serial number.
Device Name Generic name to identify the type of hardware.
Device Description Provides information about the product hardware.
Current Password Enter the current administrator password. You must correctly enter the current password
before you are able to change it.
New Password Enter a new administrator password. The characters you enter are displayed as bullet
characters to prevent others from seeing your password as you type.
The administrator password must be an alphanumeric string of up to 8 characters. Do not
use special characters or spaces.
Note: As an immediate first step in securing your wireless network, we recommend that
you change the administrator password from the default.
Confirm New Re‐enter the new administrator password to confirm that you typed it as intended.
Password
Baud Rate Select a baud rate for the serial port connection. The baud rate on the AP must match
the baud rate on the terminal or terminal emulator to connect to the AP command‐line
interface (CLI) by using a serial (console) connection.
The following baud rates are available:
• 9600
• 19200
• 38400
• 57600
• 115200
System Name Enter a name for the AP. This name appears only on the Basic Settings page and is a name
to identify the AP to the administrator. Use up to 64 alphanumeric characters, for
example My AP.
System Contact Enter the name, e‐mail address, or phone number of the person to contact regarding
issues related to the AP.
System Location Enter the physical location of the AP, for example Conference Room A.
D-Link
November 2011
Table 4: Basic Settings Page (Cont.)
Unified Access Point Administrator's Guide
Basic Settings
Page 23