D-Link DWL-3600AP Administrator's Manual page 119

Unified Access Point Administrator's Guide
Use the following steps to save a copy of the current settings on an AP to a backup configuration file by using
HTTP:
1. Select HTTP for Upload Method.
2. User the Browse button to select the file to restore.
3. Click the Restore button.
A File Upload or Choose File dialog box displays.
4. Navigate to the directory that contains the file, then select the file to upload and click Open.
(Only those files created with the Backup function and saved as .xml backup configuration files are valid to
use with Restore; for example,
5. Click the Restore button.
A dialog box opens verifying the restore.
6. Click OK to proceed.
The AP reboots. A reboot confirmation dialog and follow‐on rebooting status message displays. Please wait
for the reboot process to complete, which might take several minutes.
The Administration Web UI is not accessible until the AP has rebooted.
D-Link
November 2011
Restoring the Configuration from a Previously Saved File
.)
ap_config.xml
Unified Access Point Administrator's Guide
Page 119