Unified Access Point Administrator's Guide
Note: The following notes apply to AeroScout product and protocol support:
• D‐Link does not sell AeroScout products. Contact AeroScout for AeroScout hardware, software or
deployment information.
• The AE protocol does not support any authentication or encryption between the AE server and
the access point.
• The AE protocol requires radios to operate in promiscuous mode. This means that the AP receives
and processes all packets detected by the radios, as opposed to processing only packets destined
to the APs BSSID. This can affect AP throughput.
Modifying Radio Settings
Radio settings directly control the behavior of the radio devices in the AP and its interaction with the physical
medium; that is, how and what type of electromagnetic waves the AP emits.
To specify radio settings, click the Radio tab in the Manage section.
Different settings display depending on the mode you select. All settings are described in Table 19 on page 60.
D-Link
November 2011
Figure 15: Configuring Radio Settings
Modifying Radio Settings
Unified Access Point Administrator's Guide
Page 58