Table of Contents
Advertisement
Section 3 - Configuration
This page allows the user to configure Wireless MAC ACL settings for access control.
Wireless Band:
Displays the current wireless band rate.
Access Control List:
Select Disable to disable the filters function.
Select Accept to accept only those devices with MAC addresses in the
Access Control List. All other devices not on the list will be rejected.
Select Reject to reject the devices with MAC addresses on the Access
Control List. All other devices not on the list will be accepted.
SSID Index:
Click the drop-down menu to select the SSID for the specified wireless
band.
MAC Address:
Enter each MAC address that you wish to include in your filter list, and
click Apply.
MAC Address List:
When you enter a MAC address, it appears in this list. Highlight a MAC
address and click Delete to remove it from this list.
Current Client
Information:
This table displays information about all the current connected stations.
Upload File:
To upload an ACL list fle, click Browse and navigate to the ACL list file
saved on the computer, and then click Upload.
Load MAC File to Local
To download the ACL list, click Download and to save the ACL list.
Hard Driver:
Click to save the updated configuration. To make the updates
Save:
permanent, click Configuration > Save and Activate.
D-Link DAP-2682 User Manual
Filters
Wireless MAC ACL
59
Hide quick links:
Advertisement
Table of Contents
