Unified Access Point Administrator's Guide
Feature
Legacy Rate Sets Supported (Mbps) IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9, 6
Legacy Rate Sets (Mbps)
(Basic/Advertised)
MCS (Data Rate) Settings
(802.11n only)
Broadcast/Multicast Rate Limiting Disabled
Fixed Multicast Rate
Beacon Interval
DTIM Period
Fragmentation Threshold
RTS Threshold
TSPEC Mode
TSPEC Voice ACM Mode
Virtual Access Point Settings
Status
VLAN ID
Network Name (SSID)
Broadcast SSID
Security Mode
MAC Authentication Type
RADIUS IP Address
RADIUS Key
RADIUS Accounting
Redirect Mode
Other Default Settings
WDS Settings
STP
MAC Authentication
Load Balancing
SNMP
RO SNMP Community Name
SNMP Agent Port
SNMP Set Requests
Managed AP Mode
D-Link
November 2011
Table 66: UAP Default Settings (Cont.)
Default
IEEE 802.11b: 11, 5.5, 2, 1
IEEE 802.11g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1
IEEE 802.11a: 24, 12, 6
IEEE 802.11b: 2, 1
IEEE 802.11g: 11, 5.5, 2, 1
0–15 Enabled
Auto
100
2
2346
2347
Off
Off
VAP0 is enabled on both radios, all other VAPs disabled
1
dlink1 through dlink16
Allow
None (plain text)
None
10.90.90.1
secret
Disabled
None
None
Disabled
No stations in list
Disabled
Enabled
public
161
Enabled
Enabled
Default AP Settings
Unified Access Point Administrator's Guide
Page 162