Viewing Events; Configuring Persistent Logging Options; Figure 3: Viewing Events - D-Link DWL-3600AP Administrator's Manual

Unified Access Point Administrator's Guide
Viewing Events
The Events page shows real‐time system events on the AP such as wireless clients associating with the AP and
being authenticated.
To view system events, click the Events tab.
From the Events page, you can perform the following tasks:
• View the most recent, high‐level events generated by this AP.
• Enable and configure persistent logging to write system event logs to non‐volatile memory so that the
events are not erased when the system reboots.
• Set a Severity Level to determine what category of log messages are displayed.
• Set Depth to determine how many log messages are displayed in the Event log.
• Enable a remote log relay host to capture all system events and errors in a Kernel Log.
Note: The AP acquires its date and time information using the network time protocol (NTP). This data
is reported in UTC format (also known as Greenwich Mean Time). You need to convert the reported
time to your local time. For information on setting the network time protocol, see "" on page 106.
Configuring Persistent Logging Options
If the system unexpectedly reboots, log messages can be useful to diagnose the cause. However, log messages
are erased when the system reboots unless you enable persistent logging.
D-Link
November 2011
Figure 3: Viewing Events
Unified Access Point Administrator's Guide
Viewing Events
Page 32