Acl - D-Link DPN-101G User Manual

Section 3 - Configuration
Choose Admin > ACL, the page shown in the following figure appears. This page is used to configure the IP Address for Access Control List. If ACL
is enabled, only the IP address in the ACL Table can access CPE. Here you can add/delete the IP Address.
The following table describes the parameters of this page:
Field
IP Address Set this to let specific PC to access the device.
Set this to calculate with IP Address and
determine the IP range. For example,
Subnet Mask
192.168.1.1/255.255.255.0 means IP range
192.168.1.1 ~ 192.168.1.254
Select the service which is able to used to access
ServiceName
the device..
D-Link DPN-101G User Manual

ACL

Description
39