Download Print this page

D-Link DWL-6600AP Quick Installation Manual

Unified concurrent dual-band access point.
Hide thumbs
   

Advertisement

Quick Installation Guide
Unified Concurrent Dual-Band Access Point
This document will guide you through the basic installation
process for your new D-Link Wireless N Access Point.
DWL-6600AP
Documentation also available on
CD and via the D-Link Website

Advertisement

   Related Manuals for D-Link DWL-6600AP

   Summary of Contents for D-Link DWL-6600AP

  • Page 1: Quick Installation Guide

    Quick Installation Guide Unified Concurrent Dual-Band Access Point This document will guide you through the basic installation process for your new D-Link Wireless N Access Point. DWL-6600AP Documentation also available on CD and via the D-Link Website...

  • Page 2: System Requirements

    DWL-6600AP Quick Install Guide This installation guide provides basic instructions for installing the DWL-6600AP Wireless Access Point on your network. For additional information about how to use the Access Point, please see the User’s Manual which is available on the CD included in this package or from the D-Link support website.

  • Page 3: Hardware Overview

    POWER – When this LED is lit in red, the access point is during boot-up. When this LED is lit in green, the access point is ready. Interfaces Console Port Power Receptor LAN Port (PoE) D-Link DWL-6600AP Quick Install Guide...

  • Page 4

    Antenna Selector Switch ("INT" or "EXT") Reset Button Note: The DWL-6600AP has an internal antenna. If you would like to use external antennas, please slide the selector switch to the “EXT” position and attach the antennas. D-Link DWL-6600AP Quick Install Guide...

  • Page 5

    To power on the DWL-6600AP, you can use ONE of the following methods: 1. Connect the supplied power adapter, OR 2. Plug one end of your Ethernet cable into the LAN port of the DWL-6600AP, and the other end into a port on a PoE switch.

  • Page 6: Install The Access Point

    Install the access point: Follow these step-by-step instructions to install the DWL-6600AP on a wall or ceiling: Step 1: Place the mounting ring on the ceiling and position it so that the arrow symbol (triangle) points in the direction that the product’s front side should face.

Comments to this Manuals

Symbols: 0
Latest comments: