D-Link DWL-3600AP Administrator's Manual page 80

Unified Access Point Administrator's Guide
Field Description
RADIUS IP Address Enter the IPv4 or IPv6 address for the primary RADIUS server for this VAP.
RADIUS IPv6 If the IPv4 RADIUS IP Address Type option is selected in the previous field, enter the IP
Address address of the RADIUS server that all VAPs use by default, for example 192.168.10.23. If
the IPv6 RADIUS IP Address Type option is selected, enter the IPv6 address of the primary
global RADIUS server, for example 2001:0db8:1234::abcd.
RADIUS IP or IPv6 Enter up to three IPv4 and/or IPv6 addresses to use as the backup RADIUS servers for this
Address 1 – 3 VAP.The field label is RADIUS IP Address when the IPv4 RADIUS IP Address Type option is
selected and RADIUS IPv6 Address when the IPv6 RADIUS IP Address Type option is
selected.
If authentication fails with the primary server, each configured backup server is tried in
sequence.
RADIUS Key Enter the RADIUS key in the text box.
The RADIUS Key is the shared secret key for the global RADIUS server. You can use up to
63 standard alphanumeric and special characters. The key is case sensitive, and you must
configure the same key on the AP and on your RADIUS server. The text you enter will be
displayed as "*" characters to prevent others from seeing the RADIUS key as you type.
RADIUS Key 1 – 3 Enter the RADIUS key associated with the configured backup RADIUS servers. The server
at RADIUS IP Address‐1 uses RADIUS Key‐1, RADIUS IP Address‐2 uses RADIUS Key‐2, and
so on.
Enable RADIUS Select this option to track and measure the resources a particular user has consumed
Accounting such as system time, amount of data transmitted and received, and so on.
If you enable RADIUS accounting, it is enabled for the primary RADIUS server and all
backup servers.
Enable RADIUS Select this option to allow the secondary RADIUS server to authenticate wireless clients
FailThrough if the authentication with the primary RADIUS server is unsuccessful, or if the primary
RADIUS server is unavailable.
Active Server Specify which configured RADIUS server to use as the active RADIUS server.
Broadcast Key Enter a value to set the interval at which the broadcast (group) key is refreshed for clients
Refresh Rate associated to this VAP (the default is 300).
The valid range is 0 – 8 6400 seconds. A value of 0 indicates that the broadcast key is not
refreshed.
Session Key Refresh Enter a value to set the interval at which the AP will refresh session (unicast) keys for each
Rate client associated to the VAP.
The valid range is 0 – 8 6400 seconds. A value of 0 indicates that the broadcast key is not
refreshed.
D-Link
November 2011
Table 26: WPA Enterprise (Cont.)
Virtual Access Point Settings
Unified Access Point Administrator's Guide
Page 80