Table of Contents
Advertisement
Web User Interface
The page allows the user to configure Wireless MAC ACL settings for access control.
Wireless Band
Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Access Control List
Click the drop-down menu to select the access
control list. By default this feature is disabled.
y Select Disable to disable the filters function.
y Select Allow to accept only those devices
with MAC addresses in the Access Control
List. All other devices not on the list will be
rejected.
y Select Deny to reject the devices with MAC
addresses on the Access Control List. All other
devices not on the list will be accepted.
SSID Index
Click the drop-down menu to select the SSID for
the specified wireless band.
MAC Address
Enter each MAC address that you wish to
include in your filter list, and click Add.
MAC Address List
When a MAC address is entered, it is added to
the following index. Highlight a listing and click
Delete to remove it from the index.
Current Client
Displays information about all the current
Information
connected stations.
Upload File
To upload a ACL list file, click Browse... and
navigate to the ACL list file saved on the
computer, and then click Upload.
Load ACL File to Local
To download ACL list file, click Download and to
Hard Drive
save the ACL list.
Save
Click to save the updated configuration.
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-2620 User Manual
Filters
Wireless MAC ACL
61
Advertisement
Table of Contents
