Unified Access Point Administrator's Guide
Web Server Settings
The AP can be managed through HTTP or secure HTTP (HTTPS) sessions. By default both HTTP and HTTPS
access are enabled. Either access type can be disabled separately.
To configure Web server settings, click Web Server tab.
Field
Description
HTTPS Server Status Enable or disable access through a Secure HTTP Server (HTTPS).
HTTP Server Status Enable or disable access through HTTP. This setting is independent of the HTTPS server
status setting.
HTTP Port
Specify the port number for HTTP traffic (default is 80).
D-Link
November 2011
Figure 28: Configuring Web Server Settings
Table 37: Web Server Settings
Web Server Settings
Unified Access Point Administrator's Guide
Page 99