Figure 45: Cluster Information And Member Configuration; Figure 46: Cluster Information And Member Configuration - D-Link DWL-3600AP Administrator's Manual

Unified Access Point Administrator's Guide
The following figure shows the Cluster > Access Points page when clustering is not enabled.
The following figure shows the Cluster > Access Points page when clustering is enabled and two access points
are in the cluster.
If clustering is currently disabled on the AP, the Start Clustering button is visible. If clustering is enabled, the
Stop Clustering button is visible. You can edit the clustering option information when clustering is disabled.
D-Link
November 2011
Figure 45: Cluster Information and Member Configuration
Figure 46: Cluster Information and Member Configuration
Managing Access Points in the Cluster
Unified Access Point Administrator's Guide
Page 150