Unified Access Point Administrator's Guide
Field
Class Map Configuration
Class Map Name
Match Layer 3 Protocol
Match Criteria Configuration
Class Map Name
D-Link
November 2011
Figure 42: Client QoS DiffServ Class Map
Table 54: DiffServ Class Map
Description
Enter a Class Map Name to add. The name can range from 1 to 31
alphanumeric characters.
Specify whether to classify IPv4 or IPv6 packets.
Select name of the class to configure.
Use the fields in the Match Criteria Configuration area to match packets to a
class. Select the check box for each field to be used as a criterion for a class and
enter data in the related field. You can have multiple match criteria in a class.
Note: The match criteria fields that are available depend on whether the class
map is an IPv4 or IPv6 class map.
Creating a DiffServ Class Map
Unified Access Point Administrator's Guide
Page 139