Diffserv Configuration - D-Link DWL-3600AP Administrator's Manual

Unified Access Point Administrator's Guide
14. From the ACL Type Up menu, select IPv4.
15. From the ACL Name Up menu, select acl1.
16. Click Apply to update the AP with the QoS settings.
DiffServ Configuration
1. Log onto the AP and navigate to the Client QoS > Class Map page.
2. Enter class_voip in the Class Map Name field and click Add Class Map.
The page refreshes and additional fields appear.
3. Select the Match Every option to indicate that all match criteria defined for the class must be satisfied in
order for a packet to be considered a match.
4. Select Protocol, and then select UDP from the Select From List field to define UDP as a match criteria.
5. Select Source IP Address and enter the following information:
• Address: 192.168.1.0
• Source IP Mask: 255.255.255.0
6. Select the Destination IP Address option and enter the following information for the VoIP server:
• Address: 192.168.2.200
D-Link
November 2011
Configuring Client QoS
Unified Access Point Administrator's Guide
Page 176