Unified Access Point Administrator's Guide
Scheduler Association Settings
Scheduler Association Settings
For a Scheduler profile to take effect, you must associate it with at least one radio or VAP interface. To associate
the Scheduler profiles, select the Scheduler Association tab in the Manage section. By default, there are no
Scheduler profiles created, so no profile is associated to any radio or VAP. The Scheduler profile needs to be
explicitly associated to a radio or VAP configuration. Only one Scheduler profile can be associated to any radio
or VAP configuration; however, a single profile can be associated to multiple radios or VAPs. If the Scheduler
profile associated with a VAP or radio is deleted, then the associated profile to the VAP or radio is removed
implicitly. If the radio is operationally disabled, then all the VAPs associated to that radio are also operationally
disabled irrespective of the VAP configuration.
Figure 19: Scheduler Association
D-Link
Unified Access Point Administrator's Guide
November 2011
Page 68