Restrictions; Safety Guidelines; Safety Warnings And Guidelines - Cisco SA-VAM - VPN Acceleration Module Installation And Configuration Manual

Vpn acceleration module 2+ (vam2+) installation and configuration guide
Table of Contents

Advertisement

Chapter 2
Preparing for Installation

Restrictions

The SA-VAM2+ has the following restrictions:

Safety Guidelines

This section provides safety guidelines that you should follow when working with any equipment that
connects to electrical power or telephone wiring. This section includes the following topics:

Safety Warnings and Guidelines

Safety warnings appear throughout this publication in procedures that, if performed incorrectly, might
harm you. A warning symbol precedes each warning statement.
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Hazardous voltage or energy is present on the backplane when the system is operating. Use caution
when servicing.
Blank faceplates and cover panels serve three important functions: they prevent exposure to
Warning
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
OL-5979-03
SA-VAM2+ does not interoperate with other crypto cards, such as ISA, VAM, or VAM2, in a single
Cisco 7204VXR or Cisco 7206VXR.
The Cisco 7301 router only supports a single port adapter.
Dual SA-VAM2+ cards are only supported on the Cisco 7200VXR routers with the NPE-G1 or
NPE-G2 processor.
(Optional) SA-VAM2+ is only supported in a Port Adapter Jacket Card on Cisco 7200VXR routers
with an NPE-G1 or NPE-G2 processor. See the
information about the Port Adapter Jacket Card.
The Port Adapter Jacket Card supported on the Cisco 7200VXR router with the NPE-G1 is available
on Cisco IOS Release 12.4(6)T and 12.4(7) or later.
The Port Adapter Jacket Card supported on the Cisco 7200VXR router with the NPE-G2 is available
on Cisco IOS Release 12.4 (XD) or later.
Safety Warnings and Guidelines, page 2-3
Electrical Equipment Guidelines, page 2-4
Preventing Electrostatic Discharge Damage, page 2-4
Port Adapter Jacket Card Installation Guide
VPN Acceleration Module 2+ (VAM2+) Installation and Configuration Guide
Safety Guidelines
for more
2-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sa-vam2+

Table of Contents