ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Multicast Router VLAN Configuration
This page configures the interface to only forward the snooped IGMP packets that come from
VLAN ID (<vlanId>) to the multicast router attached to this interface. The configuration is not
needed most of the time since the switch will automatically detect the presence of a multicast
router and forward IGMP packets accordingly. It is only needed when you want to make sure
that the multicast router always receives IGMP packets from the switch in a complex network.
To access the Multicast Router VLAN Configuration page, click Switching
Snooping
Multicast Router VLAN Configuration.
1.
Use Interface to select the interface for which you want Multicast Router to be enabled
or to be displayed.
2.
Use VLAN ID to select the VLAN ID for which the Multicast Router Mode is to be Enabled
or Disabled.
3.
Use Multicast Router to enable or disable multicast router for the Vlan ID.
Chapter 3. Configuring Switching Information
Multicast
IGMP
| 179