ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
PIM-SM Candidate RP Configuration
To display the IPv6 PIM-SM Candidate RP Configuration page, click Routing
Multicast
PIM-SM
1.
Use Interface to select the interface for which data is to be displayed.
2.
Use Group Address to specify the group IPv6 address prefix transmitted in
Candidate-RP-Advertisements.
3.
Use Prefix Length to specify the group IPv6 Prefix Length transmitted in
Candidate-RP-Advertisements.
4.
Click ADD to add a new Candidate RP Address for the PIM-SM router.
5.
Click DELETE to delete an extant Candidate RP Address for the PIM-SM router.
382 |
Chapter 4. Routing
Candidate RP Configuration.
IPv6