NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 318

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Link State Database
Use the OSPFv3 Link State Database page to display the link state database.
To display the Link State Database page, click Routing
Database.
Table 44.
Field
Router ID
Area ID
318 | Chapter 4. Routing
 
OSPFv3
Description
The 32 bit integer in dotted decimal format that
uniquely identifies the router within the autonomous
system (AS). The Router ID is set on the OSPFv3
Configuration page. If you want to change the Router
ID you must first disable OSPFv3. After you set the
new Router ID, you must re-enable OSPFv3 to have
the change take effect. The default value is 0.0.0.0,
although this is not a valid Router ID.
The ID of an OSPFv3 area to which one of the router
interfaces is connected. An Area ID is a 32 bit integer
in dotted decimal format that uniquely identifies the
area to which an interface is connected.

Advanced Link State