NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 548

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
The following table describes the per-port statistics displayed on the screen.
Use the buttons at the bottom of the page to perform the following actions:
• To clear all the counters for all ports on the switch, select the check box in the row
heading and click Clear. The button resets all statistics for all ports to default values.
• To clear the counters for a specific port, select the check box associated with the port and
click Clear.
• Click Refresh to refresh the data on the screen and display the most current statistics.
Table 7-111.
Field
Interface
Total Packets Received
Without Errors
Packets Received With Error The number of inbound packets that contained errors preventing them from
Broadcast Packets Received The total number of good packets received that were directed to the
Packets Transmitted Without
Errors
Transmit Packet Errors
Collision Frames
Time Since Counters Last
Cleared
548 | Chapter 7. Monitoring the System
Description
This object indicates the ifIndex of the interface table entry associated with
this port on an adapter.
The total number of packets received that were without errors.
being deliverable to a higher-layer protocol.
broadcast address. Note that this does not include multicast packets.
The number of frames that have been transmitted by this port to its segment.
The number of outbound packets that could not be transmitted because of
errors.
The best estimate of the total number of collisions on this Ethernet segment.
The elapsed time, in days, hours, minutes, and seconds since the statistics
for this port were last cleared.