ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
DHCP L2 Relay
From the DHCP L2 Relay link, you can access the following pages:
•
DHCP L2 Relay Global Configuration
•
DHCP L2 Relay Interface Configuration
•
DHCP L2 Relay Interface Statistics
DHCP L2 Relay Global Configuration
To display the DHCP L2 Relay Global Configuration page, click System > Services > DHCP
L2 Relay> DHCP L2 Relay Global Configuration. A screen similar to the following displays.
DHCP L2 Relay Global Configuration
1.
Use Admin Mode to enable or disable the DHCP L2 Relay on the switch. The default is
Disable.
DHCP L2 Relay VLAN Configuration
1.
VLAN ID shows the VLAN ID configured on the switch.
2.
Use Admin Mode to enable or disable the DHCP L2 Relay on the selected VLAN.
3.
Use Circuit ID Mode to enable or disable the Circuit ID suboption of DHCP Option-82.
4.
Use Remote ID String to specify the Remote ID when Remote ID mode is enabled.
64 |
Chapter 2. Configuring System Information
on page 64
on page 65
on page 66s