ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
DHCPv6 Server
From the DHCPv6 Server link, you can access the following pages:
•
DHCPv6 Server Configuration
•
DHCPv6 Pool Configuration
•
DHCPv6 Prefix Delegation Configuration
•
DHCPv6 Interface Configuration
•
DHCPv6 Bindings Information
•
DHCPv6 Server Statistics
DHCPv6 Server Configuration
To display the DHCPv6 Server Configuration page, click System > Services > DHCPv6
Server> DHCPv6 Server Configuration. A screen similar to the following displays.
1.
Use Admin Mode to specify DHCPv6 operation on the switch. Value is enabled or
disabled.
2.
Use Relay Option to specify Relay Agent Information Option value. The values allowed are
between 54 to 65535. The default value is 54.
3.
Use Remote-id Sub-option to specify the Relay Agent Information Option Remote-ID
Sub-option type value. The values allowed are between 1 and 65535. The default value is 1.
on page 71
on page 72
on page 73
on page 75
on page 76
on page 77
Chapter 2. Configuring System Information
| 71