ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
To display the MAC ACL page, click Security
The MAC ACL table displays the number of ACLs currently configured in the switch and the
maximum number of ACLs that can be configured. The current size is equal to the number of
configured IPv4 ACLs plus the number of configured MAC ACLs.
To configure a MAC ACL:
1.
To add a MAC ACL, specify a name for the MAC ACL in the Name field, and click Add.
The name string may include alphabetic, numeric, dash, underscore, or space
characters only. The name must start with an alphabetic character.
Each configured ACL displays the following information:
•
Rules - Displays the number of rules currently configured for the MAC ACL.
•
Direction - Displays the direction of packet traffic affected by the MAC ACL, which
can be Inbound or blank.
2.
To delete a MAC ACL, select the check box next to the Name field, then click Delete.
3.
To change the name of a MAC ACL, select the check box next to the Name field, update the
name, then click Apply.
4.
Click ADD to add a new MAC ACL to the switch configuration.
ACL > Basic > MAC ACL.
Chapter 6. Managing Device Security
| 525