ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
PIM-SM Candidate RP Configuration
To display the PIM-SM Candidate RP Configuration page, click Routing
Candidate RP Configuration.
1.
Use Interface to select the interface for which data is to be displayed.
2.
Use Group Address to specify the group address transmitted in
Candidate-RP-Advertisements.
3.
Use Group Mask to specify the group address mask transmitted in
Candidate-RP-Advertisements.
4.
Click ADD to add a new Candidate RP Address for the PIM-SM router.
5.
Click DELETE to delete an extant Candidate RP Address for the PIM-SM router.
Multicast
PIM-SM
Chapter 4. Routing
| 367