ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Multicast Router Configuration
This page configures the interface as the one the multicast router is attached to. All IGMP
packets snooped by the switch will be forwarded to the multicast router reachable from this
interface. The configuration is not needed most of the time since the switch will automatically
detect the presence of multicast router and forward IGMP packet accordingly. It is only
needed when you want to make sure the multicast router always receives IGMP packets from
the switch in a complex network.
To access the Multicast Router Configuration page, click Switching
Snooping
Multicast Router Configuration.
1.
Use Interface to select the physical interface for which you want Multicast Router to be
enabled.
2.
Use Multicast Router to enable or disable Multicast Router on the selected interfaces.
178 |
Chapter 3. Configuring Switching Information
Multicast
IGMP