NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 304

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Stub Area Configuration
To display the Stub Area Configuration page, click Routing
Area Configuration.
1. Use Area ID to enter the OSPF area ID. An Area ID is a 32 bit integer in dotted decimal
format that uniquely identifies the area to which a router interface connects.
2. Use Import Summary LSAs to select enable or disable. If you select enable, summary
LSAs will be imported into areas. Defaults to Enable.
3. Use Default Cost to enter the metric value you want applied for the default route advertised
into the stub area. Valid values range from 1 to 16,777,215. This value is applicable only to
Stub areas.
4. Click ADD to configure the area as a stub area.
5. Click DELETE to delete the stub area designation. The area will be returned to normal state.
304 | Chapter 4. Routing
 
OSPFv3 Advanced

Stub