NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 487

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
To configure port security settings:
1. Port - Selects the interface to be configured.
2. Select the check box next to the port or LAG to configure. Select multiple check boxes to
apply the same setting to all selected interfaces. Select the check box in the heading row to
apply the same settings to all interfaces.
3. Specify the following settings:
• Security Mode - Enables or disables the Port Security feature for the selected
interface.
• Max Allowed Dynamically Learned MAC - Sets the maximum number of dynamically
learned MAC addresses on the selected interface.
• Max Allowed Statically Locked MAC - Sets the maximum number of statically locked
MAC addresses on the selected interface.
• Violation Traps - Enables or disables the sending of new violation traps designating
when a packet with a disallowed MAC address is received on a locked port.
Chapter 6. Managing Device Security | 487