NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 474

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
and 65535. A quiet period value of 0 means that the authenticator state machine will
never acquire a supplicant. The default value is 60. Changing the value will not
change the configuration until the APPLY button is pressed.
• Transmit Period - This input field allows the user to configure the transmit period for
the selected port. The transmit period is the value, in seconds, of the timer used by
the authenticator state machine on the specified port to determine when to send an
EAPOL EAP Request/Identity frame to the supplicant. The transmit period must be a
number in the range of 1 and 65535. The default value is 30. Changing the value will
not change the configuration until the APPLY button is pressed.
• GuestVLAN Id - This field allows the user to configure Guest Vlan Id on the interface.
The valid range is 0-3965.The default value is 0. Changing the value will not change
the configuration until the Apply button is pressed. Enter 0 to clear the Guest Vlan Id
on the interface.
• Guest VLAN Period - This input field allows the user to enter the guest Vlan period for
the selected port. The guest Vlan period is the value, in seconds, of the timer used by
the GuestVlan Authentication. The guest Vlan time-out must be a value in the range
of 1 and 300. The default value is 90. Changing the value will not change the
configuration until the Apply button is pressed.
• Unauthenticated VLAN id - This input field allows the user to enter the
Unauthenticated Vlan Id for the selected port. The valid range is 0-3965.The default
value is 0. Changing the value will not change the configuration until the Submit
button is pressed. Enter 0 to clear the Unauthenticated Vlan Id on the interface.
• Supplicant Timeout - This input field allows the user to enter the supplicant time-out
for the selected port. The supplicant time-out is the value, in seconds, of the timer
used by the authenticator state machine on this port to time-out the supplicant. The
supplicant time-out must be a value in the range of 1 and 65535. The default value is
30. Changing the value will not change the configuration until the Apply button is
pressed.
• Server Timeout - This input field allows the user to enter the server time-out for the
selected port. The server time-out is the value, in seconds, of the timer used by the
authenticator on this port to time-out the authentication server. The server time-out
must be a value in the range of 1 and 65535. The default value is 30. Changing the
value will not change the configuration until the APPLY button is pressed.
• Maximum Requests - This input field allows the user to enter the maximum requests
for the selected port. The maximum requests value is the maximum number of times
the authenticator state machine on this port will retransmit an EAPOL EAP
Request/Identity before timing out the supplicant. The maximum requests value must
be in the range of 1 and 10. The default value is 2. Changing the value will not change
the configuration until the APPLY button is pressed.
• PAE Capabilities - This field selects the port access entity (PAE) functionality of the
selected port. Possible values are "Authenticator" or "Supplicant".
• Periodic Reauthentication - This select field allows the user to enable or disable
reauthentication of the supplicant for the specified port. The selectable values are
'true' and 'false'. If the value is 'true' reauthentication will occur. Otherwise,
474 | Chapter 6. Managing Device Security