Ipv6 Acl - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual

IPv6 ACL

An IP ACL consists of a set of rules which are matched sequentially against a packet. When
a packet meets the match criteria of a rule, the specified rule action (Permit/Deny) is taken
and the additional rules are not checked for a match. On this menu the interfaces to which an
IP ACL applies must be specified, as well as whether it applies to inbound or outbound traffic.
Rules for the IP ACL are specified/created using the IP ACL Rule Configuration menu.
To display the IPv6 ACL page, click Security
1. IP ACL is the IP ACL ID or IP ACL Name which is dependent on the IP ACL Type. IP
ACL ID must be an integer from 1 to 99 for an IP basic ACL and from 100 to 199 for an
IP Extended ACL. IPv6 ACL Name string includes alphanumeric characters only. The
name must start with an alphabetic character.
2. Click ADD to add a new IP ACL to the switch configuration.
3. Click DELETE to remove the currently selected IP ACL from the switch configuration.
Table 7.
Field
Current Number of ACL
Maximum ACL
Rules
Type
538 | Chapter 6. Managing Device Security
 
ACL> Advanced IPv6 ACL.
Description
The current number of the IP ACLs configured on the
switch.
The maximum number of IP ACL can be configured
on the switch, it depends on the hardware.
The number of the rules associated with the IP ACL.
The the ACL type, basic IP ACL with id from 1 to 99
and Extended IP ACL with id from 100 to 199.