NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 84

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
The following table describes the Stack Configuration fields.
Table 2-29.
Field
Hardware Management Preference
Switch Status
Management Status
Stack Status
The following table describes the Stack Status fields.
Table 2-30.
Field
Unit ID
Switch Description
Serial Number
Up Time
Configured Model Identifier
Plugged-in Model Identifier
Expected Code Type
Running Code Version
Code Version in Flash
84 | Chapter 2. Configuring System Information
Description
The hardware management preference of the switch.
The hardware management preference can be
disabled or unassigned.
Displays the status of the selected unit. The possible
values are:
•
OK
•
Unsupported
•
Code Mismatch
• Config Mismatch
• Not Present
Displays whether the selected switch is the
management unit or a normal stacking member or on
standby.
Description
Unit Id of the specific switch.
The description for the unit can be configured by the
user.
The unique box serial number for this switch.
Displays the relative time since the last reboot of the
switch.
This field displays the model type assigned by the
device manufacturer to identify the device.
This field displays the model type assigned by the
device manufacturer to identify the plugged-in
device.
This field indicates the expected code type on this
unit.
This field indicates the detected version of code on
this unit.
Displays the Release number and version number of
the code stored in flash.